Samsung SF-565P-XAA - Manual (Page 179)

T ROUBLESHOOTING
9.8
Clearing LCD Error Messages
Messages appears on the display to indicate the control panel to
indicate the machine’s status or errors. Refer to the following
table to understand the message’s meaning and correct the
problem, if necessary. Messages and their meanings are listed
in alphabetical order.
Display Meaning Suggested solutions
Cancel ?
1:Yes 2:No
Your machine’s memory has
become full while
documents were being
loaded into memory.
To cancel the fax job, press the
No 1 button “Yes.”
If you want to send the pages
already stored, press the No 2
button “No.” You should send
the remaining pages later when
the memory is available.
[Comm. Error]
The machine has a
communication problem.
Ask the sender to try again.
CRU Fuse Error
The machine has a problem
with recognizing the new
toner cartridge.
Please contact a service
representative.
[Document Jam]
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
Clear the document jam. See
page 9.2.
[Door Open]
The front or rear cover is not
securely latched.
Close the cover until it locks into
place.
Group Not Available
You have tried to select a
group location number
where only a single location
number can be used, such
as when adding locations for
a broadcasting operation.
Just use a one-touch or speed
dial number or dial a number
manually using the number
keypad.