Using samsung link to send files – Samsung EV-NX300MBSTUS User Manual
Page 144
143
Wireless network >
Using Samsung Link to send files
•
You can share up to 1,000 recent files.
•
On a Samsung Link device, you can view only photos or videos captured with
your camera.
•
The range of the wireless connection between your camera and a Samsung
Link device may vary depending on the specifications of the AP.
•
If the camera is connected to 2 Samsung Link devices, playback may be
slower.
•
Photos or videos will be shared in their original sizes.
•
You can use this feature only with devices that support Samsung Link.
•
Shared photos or videos will not be stored on the Samsung Link device, but
they can be stored in the camera to meet the device's specifications.
•
Transferring photos or videos to the Samsung Link device may take some
time depending on the network connection, the number of files to be shared,
or the sizes of the files.
•
If you power off the camera abnormally while viewing photos or videos on
a Samsung Link device (for example, by removing the battery), the device
considers the camera to still be connected.
•
The order of photos or videos on the camera may be different than on the
Samsung Link device.
•
Depending on the number of photos or videos you want to share, it may
take some time to load your photos or videos and complete the initial set-up
process.
•
While viewing photos or videos on the Samsung Link device, continuously
using the device's remote or performing additional operations on the device
may prevent this feature from working properly.
•
If you reorder or sort files on the camera while viewing them on a Samsung
Link device, you must repeat the initial set-up process to update the list of
files on the device.
•
When there are no files in the camera memory, you cannot use this feature.
•
We recommend you use a network cable to connect your Samsung
Link device to your AP. This will minimize any video ‘Stuttering’ you may
experience when streaming content.
•
To view files on a Samsung Link device using the Nearby devices feature,
enable multicast mode on your AP.
•
1920X1080 (60 fps) videos can be played only on full HDTVs capable of
playback at 60 fps.
•
You can view 3D files only on 3D-compatible TVs or monitors.