Samsung SCH-U490NKAVZW - Manual (Page 29)

Call Functions 25
Voice Commands
Voice Commands is advanced speech recognition software that
can be used to activate a wide variety of functions on your phone.
Voice Commands software automatically voice activates all
contacts for voice dialing and searching, no pre-recording or
training needed. Speak phone numbers naturally to dial, and use
voice commands to navigate phone menus.
Voice Commands Settings
You can adjust the settings and
preferences by opening Voice
Commands menu. Using this
menu, you can change the
following Voice Command
features:
1. Slide the phone up and
press and hold the Voice
Commands key .
The Voice Commands
screen appears in the
display.
2. Touch the right soft key Settings.The following
options appear in the display:
• TXT Msg Readout: Reads out the text in a TXT message.
• Confirm Choices: allows you to set the command system prompts.
• Sensitivity: Sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize
names, numbers, or commands, and rejecting too little, which
means it frequently recognizes something even if nothing was said.
When Voice Commands rejects an utterance, it displays a message
such as “Please repeat…” or “No match found.” If you frequently
experience these messages, you might be able to get better
recognition by selecting the Sensitivity setting to More Sensitive. If
you frequently experience false activations (Voice Commands
detects a wrong match), you might be able to get better
performance by selecting the Sensitivity setting to Less Sensitive.
• Adapt Voice: Use the Adapt Voice menu to adapt digit dialing and
name dialing to your voice.
– Adapt VoiceMode: Lets you adapt your voice, which can improve
speech recognition. Adaptation takes about 60 seconds.
– Reset VoiceMode: Erases any VoiceMode adaptation you have done and
resets VoiceMode recognition to the factory default. If you have not
adapted your voice, this option is grayed out.
• Prompts: Turns playback on or off for prompts such as “Please say a
command.”
–
Mode: Allows you to select the mode for prompts such has “Please say
a command.”
– Audio Playback: Allows audio playback to play through the
speakerphone or through the earpiece.
Violin.book Page 25 Tuesday, March 3, 2009 2:12 PM