beautypg.com

Samsung LTN1765X-XAC User Manual

Page 12

background image

2.3

I

N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is
connected to the
ANTENNA OUT
terminal on your
cable box.

This terminal might be labeled
“ANT OUT,” “VHF OUT,”
or simply, “OUT.”.

2

Connect the other end
of this cable to the
TV ANTENNA terminal
on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the
cable that is connected
to the ANTENNA IN
terminal on your
cable box.

This terminal might be labeled
“ANT IN,” “VHF IN,”
or simply, “IN.”.

2

Connect this cable
to a two-way splitter.

3

Connect a coaxial cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.

06-CHAPTER 2_en 6/9/03 10:55 AM Page 3

This manual is related to the following products: