Samsung HW-HM60-ZA - Manual (Page 18)

FUNCTIONS
18
USB
You can play music files located on USB storage devices through the SoundStand.
Display USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the SOURCE button on the remote
control or the ( ) button on the product's top
panel repeatedly until USB appears.
3. USB appears on the display screen.
• The SoundStand connection to the USB
device is complete.
• The SoundStand automatically turns off (Auto
Power Off) if no USB device has been
connected for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
SoundStand's display.
● This product may not be compatible with certain
types of USB storage media.
● The SoundStand supports the FAT16 and FAT32
file systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of
the product. Otherwise, you may encounter a
USB compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not
operate properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is being
read.
● DRM-protected music files (MP3, WMA) from a
commercial web site cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format Codec
*.mp3
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_MSAudio1
Wave_Format_MSAudio2
*.aac
AAC
AAC-LC
HE-AAC
*.wav -
*.ogg OGG 1.1.0
*.flac FLAC 1.1.0, FLAC 1.2.1
 Supported Sampling Rate above 16KHz.