Samsung MX-H630-ZA - Manual (Page 15)

14
English English
14
English
15
Recording Speed
• Do not disconnect the USB or the AC Cord during
recording as this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC and backup the data stored in
the USB first, and then format it.
• When the USB memory has insufficient free space,
the system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must
be formatted in the FAT file system. The NTFS file
system is not supported.
• When you use the CD high speed search function,
CD recording is not available.
• Sometimes, the recording time may be longer with
some USB devices.
• In the program mode, you can't use the CD
recording function.
• The equalizer is set to "OFF" automatically and is
not available during a CD recording.
• The GIGA SOUND function is set to "OFF"
automatically and is not available during a CD
recording.
• The REPEAT function is set to "OFF" automatically
and is not available during a CD recording.
• If you use the MIC function during a CD recording,
the sound from the microphone will be recorded.
• You cannot record the radio when searching or
when no available station is found in the Tuner
mode.
• Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device’s
volume level.
• The maximum TUNER/AUX recording time is 5
hours.
You can select the recording speed before recording.
Each time you press the CD REC SPEED button on
the remote control, the recording speed will
change as follows:
RECORD SPD X 1 ; RECORD SPD X 3
• When you record from the tuner or an external source,
you cannot change the recording speed.
• If you select RECORD SPD X 3, sound is not produced
during the recording.
• If you connected the microphone, you have one
recording speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone,
the recording will stop. If you reconnect the
microphone, the recording will not restart.
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB ( ) jack on your product.
2. Play a disc, tune to a station, or connect an external
source to your product.
CD
• Press the MP3/CD button on the main unit to select
the CD function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection buttons ( [ or ] ) to select
the desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to
your product.
• Press the TUNER/AUX button to select
input.
• Play a song from the external device.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3-CD
• Press the USB REC button. The currently playing file
is copied onto the USB device.
• Press and hold the USB REC button. All the files in
the current folder are copied onto the USB device.
• When you connect a Microphone, press the USB
REC button. The currently playing file is recorded
onto the USB device, and the sound from the
Microphone is recorded too.
MP3 RECORDING: "MP3 RECORDING" "RECORD"
CD COPY: “CHECK”“START”“COPY XX”“COPY
END”
is displayed. When the recording is done, “STOP”
will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORD is displayed.
4. To stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files in
.MP3 format (SAM-XXXX.MP3).
5. After recording, a directory named
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “CD COPY”(MP3
CD), “MP3 RECORDING”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING”
is created on
your USB device.