Samsung HT-Q45T-XAA - Manual (Page 29)

L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
2 1
In Stop or no
disc mode,
press
MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ SR ➝ SL ➝ SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
Press TEST TONE button.
• Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
• Use this function to check that each speaker is correctly
connected and that there is no problem.
To end the test tone,
press
TEST TONE button again.
Alternate method: press the TEST TONE button on the remote.
Multi-Channel Pro Logic Mode
Start
Use the Test Tone feature to check the speaker connections.
Setting the Test Tone
ENG
56 55
1 2
In Stop or no disc
mode, press
MENU button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER
button.
• When the Cursor button is pressed,
the effect is greater, and when the
Cursor button is pressed, the effect is
smaller.
3 4
Press Cursor
button to move to
‘DRC’ and then
press
ENTER
Press Cursor
, to adjust
the ‘DRC’.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
This feature balances the range between the loudest and quietist sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Setting the DRC
(Dynamic Range Compression)
SETUP
MOVE ENTER EXIT MOVE ENTER EXIT
MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT CHANGE RETURN EXIT
MOVE ENTER EXIT MOVE ENTER EXIT
STOP EXIT
Q45(43~82)_XAA_ENG 3/1/06 10:2612:0 Page 54