Samsung HT-A100T-XAA - Manual (Page 47)

4
E
Ng
●
SYSTEM
SETUP
SETTINg THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
Press the Cursor % button to move to AV-SYNC and then press the
ENTEr or + button.
Press the Cursor , button to select the AV-SYNC Delay Time and
then press the ENTEr button.
You can set the audio delay time between 0 ms and 300 ms. Set it to
the optimal status.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTINg THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button.
Press the Cursor  button to move to Audio and then press the
ENTEr or + button.
Press the Cursor  button to move to HDMI AUDIO and then press
the ENTEr or + button.
Press the Cursor , button to select ON or OFF and then press
the ENTEr button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
1.
.
.
4.
~
1.
.
.
4.
M
`
`
MOVE SElECT EXIT rETUrN
MOVE SElECT EXIT rETUrN
MOVE ENTEr EXIT rETUrN
MOVE ENTEr EXIT rETUrN
02056S-HT-A100-XAC-ENG.indd 47 2008-03-18 �� 11:57:06