Samsung HT-A100T-XAA - Manual (Page 22)

connections
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
Press the AUX button on the remote control to select AUX 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIgITAl IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAl : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
Press the AUX button on the remote control to select DIgITAl IN.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIgITAl IN  AUX 1  AUX 2  USB  BT AUDIO  FM.
1.
~
.
~
M
`
1.
.
~
Audio Cable (not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
Optical Cable
(not supplied)
AUX2 : rear Panel OPTICAl : rear Panel
External Analog Component
External Digital Component
02056S-HT-A100-XAC-ENG.indd 22 2008-03-18 �� 11:56:25