American Standard 2391.202TC - Manual (Page 2)

H112
© 2008 AS America Inc.
NOTE: Dimensions shown for 2390/2391 only. Refer to installation instruction for 2392/2393 above floor installation.
229mm x 305mm
(9 x 12) CUTOUT
1524mm
(60)
762mm
(30)
32mm
(1-1/4)
FINISHED
WALL
19mm
(3/4)
FINISHED
WALL
C/L OF DRAIN
197mm
(7-3/4)
ROUGH
FLOOR
356mm
(14)
FINISHED
WALL
362mm
(14-1/4)
48mm
(1-7/8)
SEE FITTING SPECS
FOR DIMENSION
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
346mm
(13-5/8)
25mm
(1)
1651-1981mm
(65-78)
OPTIONAL
70mm
(2-3/4)
117mm
(4-5/8)
1-1/2 N.P.T.
THREADS
1-1/2 O.D.
TAILPIECE
102mm
(4)
64mm
(2-1/2)
305mm
(12)
SEE
NOTE
89mm
(3-1/2)
C/L OF
SUPPLIES
TILING FLANGE
GENERAL SPECIFICATIONS FOR 2390/2391 BATHING POOL
60 x 30 x 14 In. (1524 x 762 x 356mm)
110 Lbs. (50 Kg.)
460 Lbs. (209 Kg.)
42 Gal. (159 L)
42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)
9-1/2 In. (241mm)
37 Lbs./Sq.Ft. (175 Kgs./Sq.m)
6.2
18.1
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3 )
GENERAL SPECIFICATIONS FOR 2392/2393 BATHING POOL
60 x 30 x 17-1/2 In. (1524 x 762 x 445mm)
119 Lbs. (54 Kg.)
469 Lbs. (213 Kg.)
42 Gal. (159 L)
42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)
9-1/2 In. (241mm)
38 Lbs./Sq.Ft. (182 Kgs./Sq.m)
7.4
21.2
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
STUD
SHIM
DRY WALL
TILE
SEALANT
TUB
ROOFING NAIL
STEEL
STUD
SHIM
DRY WALL
WASHER
TILE
SEALANT
TUB
4" (102mm)
DRYWALL
SCREW
WOOD STUDS STEEL STUDS
Below is shown typical cross sections of the tub
rim showing typical wall constructions.
51 x 102mm (2 x 4) WOOD
STRINGER FULL LENGTH
NOTES:
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS.
(2391.202).
SHOWN WITH POP-UP C.D. & O.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
CONCEALED PIPING NOT FURNISHED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4 These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
Revised 2/08
PRINCETON™
RECESS BATH
AMERICAST ® BRAND ENGINEERED MATERIAL
BARRIER FREE