Samsung LN26A330J1DXZA - Manual (Page 23)

English - 21
Temporary image retention may occur when viewing a static image on the set
for more than two hours.
After selecting “Zoom1”, “Zoom2” or “Wide Fit”:
Press the ◄ or ► button to select “Position”, then press the ENTER button.
Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Press the ▲ or ▼ button to select “H-Position” or “V-Position”, then press the
ENTER button.
Press the ◄ or ► button to adjust the screen Position. Press the
ENTER button.
Reset: Press the ▲ or ▼ button to select “Reset”, then press the ENTER
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source Picture Size
TV, Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i), HDMI (720p, 1080i) 16:9, 4:3, Wide Fit, Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16: Zoom1 U Move Zoom2 U Move
16:9
Sets the picture to 16:9 wide mode. Zoom1
Magnifies the size of the picture on the
screen.
Zoom2
Magnifies the size of the picture more
than “Zoom1”.
Wide Fit U Move 4: Just Scan
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
4:3
Sets the picture to 4:3 normal mode. Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i) or
DTV (1080i) signals are input.
➣
➣
➣
➣
➣
O
Adjust Enter Return
16 :
Zoom1
Zoom2
Wide Fit
4 :
Just Scan
Size TV
Position Reset
Move Enter Return
H-Position 0
V-Position 0
Reset
Just Scan TV
BN68-01514A-X0Eng-0202_2.indd 21 2008-02-02 ¿АИД 9:45:44