Samsung LN26A330J1DXZA - Manual (Page 19)

English - 17
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button.
3. Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
4. When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ◄ or ► button, then press the ▲ or ▼ to select the correct analog signal
cable system source among “STD”, “HRC”, and “IRC”. Press the ENTER button.
If you have Digital cable TV, select the cable system signal source for both Analog
and Digital.
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
5. The TV begins memorizing all available stations.
After all the available channels are stored, it start to remove scrambled
channels(see page 28).
If you want to stop Auto Programming, press the ENTER button. The “Stop
Auto Program?” message will be displayed. Select “Yes” by pressing the ◄ or ►
button, then press the ENTER button.
Press the ExIT button to exit.
Move Enter Return
Selects the antenna to execute the Auto
Program function.
Auto Program
Move Enter Return
TV
Start Air
Cable
Auto
Start
Start
Move Enter Return
Selects a cable signal type for your location.
Auto Program
Move Enter Return
TV
analog
Start STD
HRC
IRC
digital
Antenna : Air ►
Auto Program ►
Clear Scrambled Channel ►
Channel List ►
Name ►
Fine Tune ►
Signal Strength ►
Channel
Move Enter Return
TV
Auto Program Plug & Play
Enter Return
Auto Program
STD
HRC
IRC
Auto Program in Progress.
DTV Cable : --
Cable : 11
Cable 0
11 %
Stop
Auto Program
Enter Return
Auto Program is completed.
Channels are memorized.
DTV Cable : 6, Cable : 4
OK
Auto Program
Move Enter Return
Stop Auto Program?
DTV Cable : --
Cable : 11
Yes
11 %
No
Plug & Play
11 %
Enter Return
Removing scrambled channel.
DTV Cable 40
Auto Program
Stop
BN68-01514A-X0Eng-0202_2.indd 17 2008-02-02 ¿АИД 9:45:36