Operation, Turning the tv on and off, Plug & play feature – Samsung LN26A330J1DXZA User Manual
Page 15
English - 1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1
minute while “Plug & Play” is running.
The Screen Saver is activated if there is no operating signal for longer than 15
minutes.
1. Press the POWER button on the remote control.
The message “Menu Language, Store Demo, Channels and Time will be set.” is
displayed.
Press the
ENTER button, the
n “Select the language of the OSD” m
enu
is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER button.
The message “Select ‘Home Use’ when installing this TV in your home.” is
displayed.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then
press the
ENTER button.
The message “Select the antennas to memorize.” is displayed.
We recommend setting the TV to “Home Use” mode for the best picture in your
home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to
“Home Use” (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the
MENU button on the TV for 5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the
ENTER button to select “Start”.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
In Cable mode, you can select the correct signal source among STD, HRC, and
IRC by pressing the ▲, ▼, ◄ or ► button, then press the
ENTER button.
If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable
system that exists in your particular area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the
ENTER button with “Stop”
selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 28). The Auto program menu then reappears.
Press the
ENTER button when channel memorization is complete. The
message “Set the Clock Mode.” is displayed.
Turning the TV On and Off
Press the
POWER button on the remote control.
You can also use the
POWER button on the TV.
Operation
Language
:
Plug & Play
English
Español
Français
Move
Enter
Select the language of the OSD.
Select ‘Home Use’ when installing this TV in your
home.
Plug & Play
Store Demo
Home Use
Move
Enter
Select the antennas to memorize.
Start
Air
Plug & Play
Cable
Auto
Start
Start
Move
Enter
Skip
Plug & Play
Enter
Menu Language, Store Demo,
Channels and Time will be set.
Start
Plug & Play
0 %
Enter
Skip
Auto Program in Progress.
DTV Air : 02
Air : 11
DTV Cable : 2 Cable : 21
Cable 0
Auto Program
Stop
Plug & Play
77 %
Enter
Skip
Removing scrambled channel.
DTV Cable 41
Auto Program
Stop
Selects a cable signal type for your location.
Plug & Play
Move
Enter
Skip
analog
Start
STD
HRC
IRC
digital
STD
HRC
IRC
BN68-01514A-X0Eng-0202_2.indd 13
2008-02-02 ¿АИД 9:45:30