Samsung HW-D650S-ZA - Manual (Page 38)

38
English
Setup
Setting the Speaker Level
You can set the balance and level of speakers.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
Press the ▲▼ buttons to select SPK LEVEL, and then press
the ENTER button.
Press the ▲▼ buttons to select the speaker you want.
Each time you press this button, F.L  F.R CEN  S.L 
S.R  SBL  SBR  S.W will be selected in turn.
Press the ◄ ► buttons to set the Speaker Level mode.
You can adjust it from -10 to +10dB in 1 step increments.
The sound gets quieter at -10dB and louder at
+10dB.
- Setting Speaker Level -
• F.L (front left) : -10 ~ +10dB • SW (subwoofer) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB • FHL (front height left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB • FHR (front height right) : -10 ~ +10dB
NOTE
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front
Height Speaker (FHL/FHR).
You can also change the subwoofer level by using the SUBWOOFER,
<
,
>
buttons on the remote
control.
1.
•
2.
3.
4.
•
5.
•
•
✎




FRONT LEFT
FRONT RIGHT
CENTER
SURROUND LEFT
SURROUND RIGHT
SPEAKER LEVEL
> MOVE SELECT ' RETURN EXIT
◄ 0 d B ►
0 d B
0 d B
0 d B
0 d B
▼
HW-D600_D650S_XAA_0616.indd 38 HW-D600_D650S_XAA_0616.indd 38 2011-06-16 10:27:57 2011-06-16 10:27:57