Samsung WAM270-ZA - Manual (Page 39)

A
Adding a Link Mate
• Before adding a Link Mate, unplug all Link Mates that are connected to the Samsung
Multiroom app.
• If you add a new HUB and an extra Link Mate and connect them to the same wireless
router that an existing Link Mate is connected to, the existing Link Mate will disappear
from the Samsung Multiroom app. To re-connect the existing Link Mate, connect it to the
newly added HUB.
❚ Adding an extra Link Mate to a HUB that is connected to a Link Mate
1 Press the SPk Add button on the back of the HUB.
(The Pairing indicator on the front of the HUB will blink.)
NOTE
9
The pairing indicator ( ) flashes during the pairing mode. You plug in the Link Mate whille the
indicator is flashing.
2 Plug the Link Mate you are adding into an electrical outlet, and then press the dEVICE
Add button on the back of the Link Mate.
When the Link Mate connects to the HUB, the Link Mate beeps or sounds, and the Link
Mate's LED indicator stops flashing.
3 On your smart device, select the Samsung Multiroom app. Setup starts.
NOTE
9
After pairing is complete, the Link Mate naming screen appears. Edit the name or enter a name of your
own choosing.
39
4444