Samsung ML-3471ND-XAR - Manual (Page 8)

Introduction_ 8
Benefits of using the SyncThru™ Admin 5 Device Map Plug-in
With the SyncThru™ Admin 5 Device Map Plug-in, you can organize your devices based on location. For example, if
devices are spread out between the 35th and 36th floors, you can create maps of the two floors showing where each
device is located. After configuring the maps, you can find the devices' locations on the maps. It will be much easier to
check devices’ location using a map. If a device has an error(s) and requires manual service, you can search for the
location on the map and go to the device.
Main features the of SyncThru™ Admin 5 Device Map Plug-in
• Configure maps with the location information of the devices (See "Configuring maps" on page 13).
• Configure maps using drag-and-drop functionality (See "Configuring maps" on page 13).
• Monitor the status of the devices by looking at the map (See "Viewing a map" on page 15).
• Get map information from the Device List (See "Viewing the location of a specific device" on page 16).
• Print maps (See "Printing the map" on page 17).
Icon overview
The following table shows icons used in the SyncThru™ Admin 5 Device Map Plug-in and their meanings:
Device status icons on the map
Other icon
ICON STATUS DESCRIPTION
Normal The device is on-line and working fine.
Warning The device is in a state where an error might occur in the future.
For example, it might be in a toner low status which may lead to
toner empty.
Error The device has an error(s).
Disconnected The device is disconnected
ICON NAME DESCRIPTION
Door Mark When you click the Add Door Mark button on the Map Settings
panel, you can see this icon on the map (See "Overview" on
page 15).
Use this icon to locate doors in your office on the map.