Samsung LN32B550K1FXZA - Manual (Page 7)

English - 5
¦
Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV.
N The performance of the remote control may be affected by bright light.
N The product color and shape may vary depending on the model.
1 POWER: Turns the TV on and
off.
2 TV: Selects the TV mode directly
3 NUMERIC BUTTONS: Press to
change the channel.
4 _: Press to select additional
channels (digital) being
broadcast by the same station.
For example, to select channel
‘54-3’, press ‘54’, then press _
and ‘3’.
5 MUTE M: Press to temporarily
cut off the sound.
6 y: Press to increase or
decrease the volume.
7 CH LIST: Used to display
Channel Lists on the screen.
8 TOOLS: Use to quickly select
frequently used functions.
9 INFO: Press to display
information on the TV screen.
0 COLOR BUTTONS: Use these
buttons in the Channel list menus
etc.
! MEDIA.P: Allows you to play
music files and view pictures.
@ P.MODE: Press to select the
picture mode.
# Use these buttons in the DMA
and Anynet+ modes. (∏: This
remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)
$ ON/OFF @: Pressing the
ON/OFF @ light button toggles
between on and off. When the
remote control is on, and a
button is pressed on the remote
control, the remote control
buttons will be lit for a moment.
(Using the remote control with
the ON/OFF @ light button
set to On will reduce the battery
usage time.)
% PRE-CH: Enables you to return
to the previous channel you were
watching.
^ z : Press to change
channels.
& SOURCE: Press to display
and select the available video
sources.
* FAV.CH: Press to switch to your
favorite channels.
( MENU: Displays the main on-
screen menu.
) RETURN: Returns to the
previous menu.
a UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTERE: Use to
select on-screen menu items and
change menu values.
b EXIT: Press to exit the menu.
c P.SIZE: Picture size selection.
d SRS: Selects SRS TruSurround
HD mode.
e CC: Controls the caption
decoder.
f MTS: Press to choose stereo,
mono or Separate Audio
Program (SAP broadcast).
¦
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
N Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)
N If the remote control doesn’t work, check the following:
● Is the TV power on?
● Are the plus and minus ends of the batteries reversed?
● Are the batteries drained?
● Is there a power outage or is the power cord unplugged?
● Is there a special fluorescent light or neon sign nearby?
1
$
%
^
&
*
(
)
a
b
c
d
e
f
2
3
4
5
6
7
8
9
0
!
@
#