Samsung EC-PL20ZZBPSUS - Manual (Page 41)

Shooting options 40
Shooting in the dark
• Flash options are not available if you set burst options or select
Blink Detection.
• Make sure that your subjects are within the recommended distance
from the flash. (p. 93)
• If light from the flash is relected or there is a large amount of dust in
the air, tiny spots may appear in your photo.
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
1
In Shooting mode, press [ ].
2
Select Shooting → ISO → an option.
• Select to use an appropriate ISO speed based on the
brightness of the subject and lighting.
• The higher ISO speed you select, the more image noise you may get.
• When you select
Motion Capture, the camera sets the ISO speed
to Auto.
Option Description
Red-eye Fix*:
• The flash fires twice when the subject or background
is dark. The subject should not move until the flash
fires a second time.
• The camera corrects red-eyes through its advanced
software analysis.
Slow Sync:
• The flash fires and the shutter stays open longer.
• Select this when you want to capture ambient light to
reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
Fill in:
• The flash always fires.
• The camera adjusts light intensity automatically.
Red-eye*:
• The flash fires twice when the subject or background
is dark.
• The camera reduces red-eyes.
Auto: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.