Samsung RM255BARB-XAC - Manual (Page 22)

ADJUSTING THE HEIGHT BETWEEN THE DOORS
22
Making small adjustments between doors.
If the door of fridge is lower than that of the freezer,
1) If you open the Fresh Select Zone Door ( ➀), you can see the hinge-mid (➁).
2) Insert enclosed hex wrench ( ➂) into the shaft (➃) of the hinge mid.
3) Please adjust the height difference between the doors turning the hex wrench ( ➂) clockwise ( )
or counter clockwise ( ).
4) After adjusting the doors, please insert enclosed fastener-ring ( ⑤) using a plier (⑥) in the gap
between the hinge-grommet ( ⑦) and the hinge-mid (⑧).
The number of the fastener-ring to insert depends on the gap.
When you turn counter clockwise ( ), the door goes up.
NOTE
Four fastener-rings are enclosed with the refrigerator.
NOTE
adjustment part
NEXT-PJT IB (D01516A) 2005.10.26 3:46 PM 페이지22