Samsung HPR5052X-XAP - Manual (Page 87)

87
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1 Press the MENU button. Press the ▲ or ▼ button to select
“Channel”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “LNA”, then press the
ENTER button.
3 Press the ▲ or ▼ button to select “On” or “Off”, then
press the ENTER button.
4 Press the MENU button to exit.
Notes
• LNA functions only when antenna is set to AIR and the settings will be stored separately in
each channel. (See “Selecting the Antenna” on page 80.)
• If the picture is noisy with the LNA set to On, select Off.
• The LNA setting must be made separately for each channel.
Channel T V
Move Enter Return
… More
Channel List
Signal Strength
LNA : Off
… More
Channel List
Signal Strength
LNA : Off
Channel T V
Move Enter Return
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
† More
Channel T V
Move Enter Return
Off
On
Off
On
BN68-00835A-00(078~087) 4/6/05 8:29 PM Page 87