Samsung HPR5052X-XAP - Manual (Page 43)

43
Storing Channels in Memory
4 Press the ▲ or ▼ button to select the antennas to
memorize. Press the ENTER button to select “Start”.
5 In Air, press the ENTER button to start the auto program.
In Cable or Air + Cable, press the ENTER button to
select the cable system.
Press the
▲ or ▼ button to select “Digital Channel or
Analog Channel”, then select the cable system.
Press the
▲ or ▼ button to select “Start” and press
the ENTER button to start the auto program.
6 The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
Press the EXIT button to exit.
Note
• The TV must be connected to an antenna in
order to receive digital TV signals.
Even if a particular channel is deleted from the
memory, you can always tune to that channel
directly by using the number buttons on the
remote control.
Notes
• All available DTV and analog channels are automatically stored in memory when channels are
selected by directly accessing channels.
• It takes approximately 3 to 10 minutes to memorize channels.
Auto Program T V
Move Enter Return
Select the cable system.
Digital Channel : STD √
Analog Channel : STD √
Start
Auto Program
Enter Return
Auto Program in progress.
Air Channel 67
Stop
Auto Program T V
Move Enter Return
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
BN68-00835A-00(036~049) 4/6/05 8:21 PM Page 43