Auto Page AutoPage RF-501 - Manual (Page 16)

AUTOPAGE ALARM ACCESSORIES
AP-4000DX Paging System
Vehicle security paging was originated by AutoPage over 15 years ago.
The "SHADOW" is our latest version providing a full four watts of output
power to signal a handsome belt-clip paging receiver indicating your
RF-501 has been triggered, even if you cannot hear the siren.
RS-31 Perimeter Protection Sensor
The RS-31 utilizes microwave technology that emits a prote ctive field
within the vehicle interior. The adjustable field allows the RF-501 to be
armed and provide maximum protection in convertible vehicles parked
with the top down, and equally good protection in enclosed vehicles.
Any movement within the field will trigger the RF-501.
SIS-3 Glass/Shock/Motion Sensor
Our top selling and extremely reliable electronic glass/shock sensor.
The SIS-3 can be finely adjusted for each installation, from sports cars
to trucks. When properly adjusted, it virtually eliminated false triggers
typically caused by inferior sensors.
MSEN-KIT
The MSEN-KIT includes two pre-wired Micro Resonance Sensors and
a special triggering amplifier. These special sensors are designed to
be mounted within the vehicle door or on the door p ost near the
latching mechanism that keeps the door closed. When properly
adjusted, they will respond to the frequency caused by metal-to-metal
contact, such as a lock pick, screwdriver, or profession door opening
tools inserted into the door for attempte d illegal entry into the vehicle.
the MSEN-KIT sensors are designed to provide limited coverage to
specific areas. They should be used in conjunction with other
AutoPage sensors for maximum protection capabilities.