Samsung EV-NX2000BABUS - Manual (Page 125)

124
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.
Connecting to a WLAN
1 On the Mode screen, touch Wi-Fi → Auto Backup, Email,
SNS & Cloud, or Samsung Link.
2 Touch → Wi-Fi Setting.
• In some modes, follow the on-screen instructions until the Wi-Fi
Setting screen appears.
• The camera automatically searches for available AP devices.
3 Touch an AP.
Refresh
Samsung1
Samsung2
Samsung3
Samsung4
• Touch Refresh to refresh connectable APs.
• Touch Add wireless network to add an AP manually. Your AP name
must be in English to add the AP manually.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Open network setting options.
• When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 127)
• When a login page appears, refer to "Using the login browser".
(p. 125)
• When you select an unsecured AP, the camera will connect to the
WLAN.
• If you select a WPS profile supported AP, touch → WPS PIN
connection, and then enter a PIN on the AP device. You can also
connect to a WPS profile supported AP by touching
→ WPS
button connection on the camera, and then pushing the WPS
button on the AP device.