Samsung DVD-VR300-XAA - Manual (Page 39)

P
layback
English - 39
Press OPEN/CLOSE button to close the disc tray.
• Your DVD Recorder-VCR closes the disc tray and
plays the disc automatically.
• When a recordable media (DVD-RAM, DVD-RW,
DVD-R, etc.) is used, Auto Playback cannot be
activated without pressing the Play button. When
pressing the Power button while a disc is in the
tray, the unit will be activated. Press PLAY to start
playback.
• If you insert MP3 Disc, your DVD Recorder-VCR
will display the file list on the screen and start.
• When a JPEG disc is inserted, folders and a file list
are displayed in the Album format.
3
Press the STOP button to stop playback. 4
When you stop disc play, the recorder remembers
where you stopped, so when you press PLAY but-
ton again, it will pick up where you left off. (unless
the disc is removed or the recorder is unplugged,
or if you press the STOP button twice.) This func-
tion is only applicable to DVD-VIDEO, DVD-RAM,
DVD-RW, DVD-R or audio CDs (CD-DA).
Note
Do not move your DVD Recorder-VCR while play-
ing, as this may cause damage to the disc.
Make sure to press the OPEN/CLOSE button to
open or close the disc tray.
Do not push the disc tray while it is being opened
or closed, as this may cause a product malfunction.
Do not place foreign materials on or in the disc
tray.
Some functions may perform differently or be dis-
abled depending on the disc type. If this occurs,
refer to the instructions written on the disc case.
Be especially careful that children's fingers are not
caught between the disc tray and the tray chassis
when it closes.
After turning power on, it will take a few
seconds until the DVD operates.
CAUTION
Press the OPEN/CLOSE button. 1
Place a disc gently into the tray with the disc’s label
facing up. 2