Samsung DVD-VR300-XAA - Manual (Page 3)

G
etting Started
English - 3
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that pro-
duce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. if the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched par-
ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
Important Safety Instructions
Handling Cautions
Precaution
• Before connecting other components to this recorder, be
sure to turn them all off.
• Do not move the recorder while a disc is being played, or
the disc may be scratched or broken, and the recorder’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small
metal objects on the recorder.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electrici-
ty can affect normal operation of this recorder. If this
occurs, turn the recorder off and on again with the
POWER button, or disconnect and then reconnect the AC
power cord to the AC power outlet. The recorder will
operate normally.
• Be sure to remove the disc and turn off the recorder after use.
• Disconnect the AC power cord from the AC outlet when
you don’t intend to use the recorder for long periods of
time.
• Clean the disc by wiping in a straight line from the inside
to the outside of the disc.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power
cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for
cleaning.
• Wipe the cabinet with a soft cloth.
Disc Handling
• Use discs with regular shapes.
If an irregular disc (a disc
with a special shape) is used,
this DVD Recorder-VCR may
be damaged.
• Avoid touching the surface of a disc
where recording is performed.
Holding discs
• This is used to prevent damage by dirt, scratches, etc.,
when using a DVD-RAM/RW/R disc.
Cartridge
• Clean with an optional DVD-RAM/PD
disc cleaner (LFK200DCA1 where
available).Do not use cleaners or cloths
for CDs to clean DVD-RAM/DVD-
RW/DVD-R discs.
DVD-RAM, DVD-RW and DVD-R
The product unit accompanying this user manual is
licensed under certain intellectual property rights of
certain third parties. This license is limited to private non-
commercial use by end-user consumers for licensed con-
tents. No rights are granted for commercial use. The license
does not cover any product unit other than this product
unit and the license does not extend to any unlicensed
product unit or process conforming to ISO/IEC 11172-3 or
ISO/IEC 13818-3 used or sold in combination with this
product unit. The license only covers the use of this prod-
uct unit to encode and/or decode audio files conforming to
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are
granted under this license for product features or functions
that do not conform to the ISO/IEC 11172-3 or ISO/IEC
13818-3.