Samsung DVD-VR300-XAA - Manual (Page 34)

34 - English
S
ystem Setup
Select “Tape Length”
Press the RIGHT button to select the Tape Length.
This information is usually printed on the tape box.
The menu cycles through: T-120, T-160 or T-180.
Once the type of cassette is set, the VCR can display
the amount of time remaining on the tape when you
press the INFO. button.
5
n
:
:
:
Select “Auto Play”
Move the selection bar to “Auto Play,” then press
right button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as the
safety tab of the cassette has been removed.
• Off - Auto play is disabled.
6
Select “VCR”
Using the ❷ buttons, move the selection bar to
“VCR”, then press ENTER to select.
4
On
Off
VCR Setting
If you want your videotapes to play automatically when you
insert them, turn on Auto Play.
Open “MENU”
With the VCR in Stop or Play mode, press the
MENU button.
1
Select “System”
Use the ❷ buttons to highlight “System” then
press the ENTER button.
3
Only tapes that are missing the Record Safety Tab
will play automatically when inserted.
Note
DVD-VIDEO
Select “Setup”
Using the ❷ buttons, move the
selection bar to “Setup” then press ENTER to select.
2
n
:
:
:
T-120
T-160
T-180