Samsung NP470R5E-K02UB - Manual (Page 61)

60
Chapter 2.
Using the computer
Using the TPM Security Solution
(Optional)
If the virtual drive (PSD) is not loaded
To use the virtual drive (PSD), the virtual drive (PSD) should be
loaded first. To load a PSD, follow the procedures below.
1
On the taskbar, right-click Security Platform ( ).
2
Select Personal Secure Drive > Load.
3
In the load window, enter the basic user password and click
OK.
4
On the taskbar, open File Explorer ( ) to confirm that the
Personal Secure Drive has been created.
If confidential data has been copied to the PSD, the original
data files are not encrypted.
Registering a new user to the securitysolution
To register an existing user, delete the existing authentication
information saved on the TPM chip, and then clear the TPM chip.
Register the user in the following order.
Step 1: Deleting a virtual drive
If a virtual drive has been created, delete the virtual drive before
deleting the existing authentication information saved on the TPM
chip.
1
On the taskbar, select and right-click .
2
Select Personal Secure Drive > Create/Manage.
3
Select Next.