Operation, Turning the tv on and off, Plug & play feature – Samsung LNT7081FX-XAA User Manual

Page 14

English - 12

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER button on the remote control.

The message “Menu language, Shop Mode, Channels and Time will be set.” is

displayed.
Press the

ENTER button, the

n “Select the language of the OSD” m

enu

is automatically displayed.

2. Press the ▲ or ▼ button to select language, then press the ENTER button.

The message “Select Home Mode when installing this TV at home.” is displayed.
3. Press the ◄ or ► button to select “Shop” or “Home”, then

press the

ENTER button.

The message “Select the antennas to memorize.” is displayed.

We recommend setting the TV to Home mode for the best picture in your

home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic

(Home) mode, press any Volume button and then hold down the

MENU button

for five seconds on the side panel of the TV.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection.

Press the

ENTER button to select “Start”.

If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to

ANT 2 (CABLE), select “Cable”.

If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.

In Cable mode, you can select the correct signal source among STD, HRC,

and IRC by pressing the ▲ or ▼ button, then press the

ENTER button.

Contact your local cable company to identify the type of cable system that

exists in your particular area.
5. The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reappears.

Press the

ENTER button when channel memorization is complete.

The message “Select the clock mode.” is displayed.

To stop the search before it has finished, press the

ENTER button with stop

selected.

6. Press the ENTER button.

Press the ▲ or ▼ button to select “Auto”, then Press the

ENTER button.

The message “Set to daylight savings time.” is displayed.

If you select “Manual”, “Set current date and time.” is displayed. (See page 48)

Turning the TV On and Off

Press the

POWER button on the remote control.

You can also use the

POWER button on the TV.

Operation

Select Home Mode when installing this TV at home.

Plug & Play

Clock Set

Menu Language :

Plug & Play

English

Español

Français

Move

Enter

Skip

Shop

Menu language, Shop Mode,

Channels and Time will be set.

Start

Select the language of the OSD.

Home

Move

Enter

Skip

Select the antennas to memorize.

Start

Air

Plug & Play

Cable
Air+Cable

Start
Start

Move

Enter

Skip

Clock Mode

Move

Enter

Skip

Select the clock mode.

Plug & Play

Manual

Auto

Plug & Play

Auto Program is complete.

16 Channels were memorized.

Air : 16, Cable : 0.

Enter

Skip

Plug & Play

Stop

Enter

Skip

Auto Program in progress.

Air Channel 0

Plug & Play

BN68-01308B-00Eng_0911.indd 12

2007-10-04 �� 3:02:59