Samsung EC-ST200FBPBCA - Manual (Page 121)

Wireless network (ST200F/ST201F/ST205F only) 120
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature
may not be supported on some devices.
1
On the device, turn on the Wi-Fi Direct option.
2
On the camera, in Playback mode, scroll to a photo.
3
Press [ ], and then select Share(Wi-Fi) →
Wi-Fi Direct.
• When in the single image view, you can send only one photo
at a time.
• When in the thumbnails view, you can select multiple photos
by scrolling to thumbnails, and then pressing [
].
Select Next when you are finished selecting photos.
4
Select the device from the camera’s list of Wi-Fi Direct
devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of
Wi-Fi Direct devices.
5
On the device, allow the camera to connect to the
device.
• The photo will be sent to the device.
• When there are no photos in the camera memory, you cannot use
this feature.
• If you cancel the connection attempt before it is complete, the camera
may not be able to reconnect to the device. In this case, update your
device with the latest firmware.