Samsung EC-ST200FBPBCA - Manual (Page 105)

Wireless network (ST200F/ST201F/ST205F only) 104
Connecting to a WLAN and configuring network settings
Using the login browser
You can enter your login information via the login browser when
connecting to some APs, sharing sites, or cloud servers.
Button Description
[ / / / ] Move to an item or scroll the page.
[ ] Select an item.
[ ]
Access the following options:
• Previous Page: Move to the previous page.
• Next Page: Move to the next page.
• Reload: Reload the page.
• Stop: Stop loading the page.
• Exit: Close the login browser.
[ ] Close the login browser.
• You cannot select some items depending on the page you
connected and this does not indicate a malfunction.
• The login browser may not close automatically after you log into
some pages. In this case, close the login browser by pressing [ ],
and then proceed with the desired operation.
• It may take longer to load the login page due to the page size or
network speed. In this case, wait until the login information input
window appears.
Setting network options
1
In the Wi-Fi Setting screen, move to an AP,
and then press [ ].
2
Select each option and enter the required information.
Option Description
Authentication Select a network authentication type.
Data Encryption Select an encryption type.
Network Password Enter the network password.
IP Setting Set the IP address manually.
Manually setting the IP address
1
In the Wi-Fi Setting screen, move to an AP,
and then press [ ].
2
Select IP Setting → Manual.
3
Select each option and enter the required information.
Option Description
IP Enter the static IP address.
Subnet Mask Enter the subnet mask.
Gateway Enter the gateway.
DNS Server Enter the DNS address.