Alpine CVA-1003 - Manual (Page 53)

51
-EN
Installation and Connections
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
2 RCA Extension Cable (Sold Separetely)
3 RGB Cable (Included with NVE-N852, not
included with NVE-N871A)
4 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
5 Ai-NET Cable (Included with DVD video player)
6 System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
7 AUX Video Input (AUX1) Connector
Connect the video output lead of a DVD video player
or DVD changer to this terminal.
8 AUX Audio Input (AUX1) Connectors
(not used for this system)
9 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
! RCA Extension Cable (Included with DVD video
player)
" RGB Input Connector
Connect to the RGB output terminal of the navigation
system.
# Ai-NET Cable (Included with CD Changer)
$ Ai-NET Cable (Included with DVD Changer)
% RCA Extension Cable (Included with DVD
Changer)
& RGB Convertor Cable (KWE-503N) (Sold
Separately)
To"
(NVA-N751AS)
&
Navigation Unit
(Sold Separately)
When connecting with NVA-N751AS of the Alpine's Navigation System.
(White/Green)
(Yellow/Red)
(White/Brown)
DISPLAY CONTROL IN
GUIDE CONTROL OUT
REMOTE IN
(White/Green)
(Yellow/Red)
(White/Brown)