beautypg.com

Axxess Interface RFASWC User Manual

Page 10

background image

2. The led will turn on then release the Volume Down button and the led

will turn off.
3. The original steering wheel control settings will be restored.

Manually Setting The Radio Type

1. Within the first 20 seconds of turning the ignition on. Press and hold

down the original Volume Down button (not the Volume Down button

you just remapped) for at least 25 seconds.

2. The led will turn on then release the Volume Down button and the led

will turn off.

3. The original steering wheel control settings will be restored.

1. To manually program the aftermarket radio, press and hold the

Volume Up button on the steering wheel control until the led goes
solid red, then release Volume Up.

2. At this point Eclipse is programmed.

If you are using an Eclipse radio go to step 3.

If you are using a different radio go to step 4.

3. Press and hold Volume Down for 5 seconds. The led will flash once

then go solid red indicating the programming has finished. Go enjoy

your radio.