American Power Conversion UXI/UXICH - Manual (Page 3)

1
Introduction
The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides
protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The
UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances
by internally disconnecting from utility line power. The UPS provides continuous power from the
internal battery until utility power returns to safe levels or the battery is fully discharged.
I
NSTALLATION
Read the Safety Instruction sheet before installing the UPS.
Unpacking
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
„
UPS (with battery modules disconnected)
„
Front bezel
„
Literature kit containing:
„
Product documentation
„
Smart-UPS RT User Manuals CD
„
Warranty Information
„
Battery Cable
„
Software CD
„
Serial cable
„ 3000 VA UXI model: three output power cords,
one input power cord
„ 5000 VA UXI model: six output power cords
„ 3000 VA UXICH model: one input power cord
„
Conversion faceplate for existing Web card
upgrade
Specifications
T EMPERATURE
O PERATING
S TORAGE
32° to 104° F (0° to 40° C)
5° to 113° F (-15° to 45° C) charge the UPS
battery every six months
M AXIMUM
E LEVATION
O PERATING
S TORAGE
10,000 ft (3,000 m)
50,000 ft (15,240 m)
This unit is intended for indoor use only.
Select a location sturdy enough to
handle the weight.
Do not operate the UPS where there is
excessive dust or the temperature and
humidity are outside the specified limits.
Ensure that the air vents on the front
and rear of the UPS are not blocked.
H UMIDITY 0 to 95% relative humidity
W EIGHT
UPS
UPS
WITH
P ACKAGING
120 lbs (55 kg)
140 lbs (64 kg)