A.O. Smith ADM - 80 - Manual (Page 36)

Conversion to a different gas category
36 Instruction manual ADM
4
is
13. Check the supply pressure and burner pressure (3.11 "Checking the supply
pressure and burner pressure") .
14. Remove the sticker showing the new gas category from the conversion kit,
and attach it below the appliance's rating plate. This clearly indicates that the
appliance may no longer be run on the gas for which it was originally
supplied.
15. Start the appliance (9 "Starting and running") .
4.2 Conversion to a
different gas
category ADM 135
4.2.1 Introduction
This paragraph describes:
•
Conversion from LP gas to natural gas
• Conversion from natural gas to LP gas
Conversion of gas control
Legend
Only applicable numbers are
mentioned.
1. burner pressure regulator
7. gas control
9. high-low control
1
9
7 IMD-0132 R1