Aiwa AV-NW31 - Manual (Page 8)

8
ENGLISH
BEFORE OPERATION
SPEAKERS
DIMMER
PHONES SHIFT
POWER 6 STANDBY/ON
POWER
DISPLAY
To turn the unit on
Press POWER 6 6 6 6 6 STANDBY/ON (POWER).
The STANDBY/ON indicator lights in green.
Operation is possible after four seconds.
The volume level or
function name is displayed one after the other for the first four
seconds.
To change the brightness level of the display
Press DIMMER (hold down SHIFT and press
DISPLAY) repeatedly.
The dimmer mode changes as follows.
DIM-OFF
DIMMER 3 (No display)
DIMMER 1 DIMMER 2
DIM-OFF: The normal display
DIMMER 1: The illumination of the display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer
.
DIMMER 3 (no display): Everything on the display is cleared.
NOTE
While in the mode other than DIM-OFF , if you operate the receiver ,
the display illuminates at the DIM-OFF level, and after 6 seconds,
the display brightness returns to the level previously set.
Note that “DIMMER” is displayed for one second before everything
is cleared when the previously set level is “no display”.
Using the headphones
Connect headphones with a standard stereo plug (ø6.3 mm, 1 /
4
inch) to the PHONES jack. Be sure to turn of f the speakers by
pressing SPEAKERS. Otherwise sound is output from the
speakers.
To turn the unit off, press POWER 6 STANDBY ON (POWER).
The STANDBY/ON indicator turns to red.
Operating CD players
Press the following buttons.
POWER - Turns on/of f the power .
c - Starts playback.
a - Pauses playback.
s - Stops playback.
f , g - Searches for a track.
r , t - Skips a track.
0-9, +10 - Selects a track.
PRGM while pressing SHIFT - Enters the programmed play mode.
RANDOM while pressing SHIFT - Enters the random play mode.
REPEAT while pressing SHIFT - Enters the repeat play mode.
NOTE
There are some AIWA models that cannot be operated with the
remote control, or for which some of the functions of the remote
control do not work.