Asus DELUXE P4R800-V User Manual
Page 48
2-26
Chapter 2: Hardware information
10. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)
These connectors are for the power plugs from the ATX power supply
unit. The plugs are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
In addition to the 20-pin ATXPWR connector, this motherboard requires
that you connect the 4-pin ATX +12V power plug to provide sufficient
power to the CPU.
•
Do not forget to connect the 4-pin ATX +12V power plug.
Otherwise, the system does not boot up.
•
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB).
The minimum recommended wattage is 230W, or 300W for a fully
configured system. The system may become unstable or may not
boot up if the power is inadequate.
P4R800-V
DELUXE
®
PP4R800-V DELUXE
ATX Power Connectors
ATXPWR
ATX12V
Pin 1
+3.3VDC
-12.0VDC
COM
PS_ON#
COM
COM
COM
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
COM
+5.0VDC
COM
+5.0VDC
COM
+5VSB
+12V DC
GND
+12V DC
GND