Asus DELUXE P4R800-V - Manual (Page 121)

ASUS P4R800-V Deluxe motherboard user guide 5-23
Creating an array for performance (RAID 0)
To create a RAID 0 array:
1. Click the Configuration tab, then click the Create Raid tab.
2. Select RAID 0 from the Raid Type field.
3. Set the array block size from the Block Size field.
4. Set your array in DMA or PIO mode from the Mode field.
5. Select a disk from the Available Disks pane, then click the arrow
down button to add the disk on the Selected Disks pane.
5. After setting all fields and parameters, click the Create button to
display the Create Stripe Raidset window. The window displays the
source and target disk, and allows you to create or split the data.
You must have at least two installed hard disk drives to create a RAID
0 array.