Nilfisk-ALTO ATS 46/53 - Manual (Page 31)

American-Lincoln 1-31
ATS 46/53 Battery
SWEEPING AND DUST CONTROL SYSTEMS-HOW THEY WORK
ATS 46/53 machines are equipped with a sweeping and dust control system. (See Figure 34)
DUST CONTROL
OPERATING INSTRUCTIONS
C1731 FIGURE 34
BEFORE STARTING THE MACHINE
1.
Set parking brake.
2. Make sure all controls are in the “OFF” position.
3. Be sure the directional control switch is in the center position.
4. Ensure the batteries have been fully charged and serviced (see battery service instructions).
NOTE
Before starting the machine, perform the pre-start checklist.
PRE-START CHECKLIST
1.
Check hydraulic fluid level.
2. Check all systems for leaks.
3. Check brakes and controls for proper operation.
4. Check broom patterns.
5. Check to ensure that all covers, panels and access doors are securely closed.
STARTING BATTERY MACHINES
Starting the battery powered models is accomplished by turning the key switch to the “I” (on) position. It is
important to note that the batteries should be fully charged and serviced prior to using the machine.