Nilfisk-ALTO ATS 46/53 - Manual (Page 22)

1-22 American-Lincoln
ATS 46-53 Battery
FOOT PEDAL (ACCELERATOR)
The foot pedal, or accelerator, is located on the right side of the operator compartment floor. The foot pedal
provides speed control only. To set the machine in motion, push the forward/reverse switch up or down (see
figure 3), then push down on the foot pedal. Smoothly releasing the pedal will help slow the machine before
breaking.
BRAKE PEDAL
The foot brake is located on the floor of the operator’s compartment to the left of the accelerator. To stop,
remove foot from accelerator and apply pressure to the brake pedal.
PARKING BRAKE
The parking brake is located just above and slightly left ofthe foot brake. When engaged, the parking brake
“locks” the foot brake in the down position.
To engage the parking brake, press down on the parking brake pedal.
To release the parking brake, press down on the regular brake pedal.
FOOT PEDAL
BRAKE
PARKING
BRAKE
C1789batt FIGURE 18
OPERATION OF CONTROLS AND GAUGES