AMX Mio Modero R-3 - Manual (Page 5)

Overview
1 Mio Modero R-3 Remote
Overview
The Mio Modero
®
R-3
The Mio Modero ® R-3 remote provides custom control features, contained in an elegant handheld
rechargeable device. The Mio R-3 communicates with a NetLinx
®
master via a wireless Zigbee® network.
The Mio R-3 is pre-loaded with firmware that allows joining to ZigBee Pro 2007 networks, but may be
upgraded with firmware allowing access to older ZigBee 2004 networks.
Selecting a source device sends a command to the master and runs predetermined events associated with that
source. Selecting a macro will run predefined events, which might not be associated with sources listed, then
return the device to its previous mode.
You need VisualArchitect and KeypadBuilder to properly program this device. The application and
documentation are available from www.amx.com.
FIG. 1 The Mio R-3 Device
1 - Power
2 - Record
3 - Pause
4 - Stop
5 - Rewind
6 - Play
7 - Fast Forward
8 - Skip Back
9 - Skip Forward
10 - Menu
11- Info
12 - Move Up
13 - Move Left
14 - Select
15 - Move Right
16 - Guide
17 - Exit
18 - Move Down
19 - Volume Up
20 - Last Selected
21 - Channel Down
22 - Mute
23 - Volume Down
24 - Channel Down
25 - Input
26 - Enter
Power
Transmission Mode
Current Menu
Battery Meter
Custom Macro Buttons
Custom Mode Options
2
1
16 17
10 11
12
18
13 15 14
19
23
21
24
20
22
25 26
4 3
8
6
9
5 7
Numeral Keypad