13 silence time after command sequence, 14 at command mode timeout, 15 net address mask – Campbell Scientific RF401A-Series Spread Spectrum Radios User Manual

Page 35: 16 radio address mask, Attribution, Silence time after command sequence, At command mode timeout, Net address mask, Radio address mask

RF401A-Series Spread Spectrum Radio

11.3.13 Silence Time After Command Sequence

Specifies the amount of time (in tenths of seconds) that the RS-232 interface

must be silent after accepting the AT command sequence before the RF401A

series will enter command mode.

11.3.14 AT Command Mode Timeout

Specifies the amount of time (in tenths of seconds) that must elapse with no

activity on the RS-232 interface before the RF401A series exits command

mode automatically.

11.3.15 Net Address Mask

Specifies the network portion of the address mask.

11.3.16 Radio Address Mask

Specifies the radio address portion of the address mask.

12. Attribution

PakBus is a registered trademark of Campbell Scientific, Inc.