Campbell Scientific BMP5 Direct SDK - Manual (Page 24)

Section 2. SimplePB.DLL Reference
2-14
Parameters
pakbus_address: Integer - The PakBus address of the datalogger.
device_type: Integer - The type of datalogger:
1=CR200
2=CR10XPB,
CR23XPB, CR510PB
3=CR1000
4=CR3000
5=CR800,
CR850
file_name: String - The path and file name to be controlled on the datalogger.
command: Integer - The command issued to control the file:
1 = Compile and run
2 = Run on power up
3 = Make hidden
4 = Delete file
5 = Format device
6 = Compile and run (Preseve data if no table changed)
7 = Stop program
8 = Stop program and delete
9 = Make the specified file the operating system
10 = Compile and run but do not change the "run on power up" program
11 = Pause
12 = Resume
13 = Stop the running program, delete associated files, and mark as run
now and on power up
14 = Stop the running program, delete associated files, and mark as run
now but not on power up
Return Codes
0 = Successful
-1 = Communication timed out
-2 = Port is not open