Campbell Scientific 110PV Surface Temperature Probe - Manual (Page 8)

110PV Surface Temperature Probe
The 110PV ships with:
1) Adhesive Backed 3 cm Cable Tie Mount
2) Cable Ties 8” UV Stabilized
3) Resource CD
1.1 Specifications
Temperature Range: -40° to +135°C
Survival Range: -50° to +140°C
110PV Temperature Uncertainty
-40° to 70°C: ±0.2 °C
71° to 105°C: ±0.5 °C
106° to 135°C: ±1 °C
Time Constant (average):
Test τ
Still Air 252 seconds
Surface 25 seconds
Water Submersion Depth: 50 ft (21 psi)
Linearization Error: Steinhart & Hart equation; maximum error is 0.0024°C at
-40°C.
Maximum Cable Length: 1000 ft
Disk Diameter: 1.0 in. (2.54 cm)
Overall Probe Length: 2.5 in. (6.35 cm)
Overmolded Joint Dimensions:
Width: 0.44 in. (1.12 cm)
Height: 0.58 in. (1.47 cm)
Length: 2.25 in. (5.72 cm
Cable Diameter: 0.245 in. (0.622 cm)
Material
Disk:
Anodized Aluminum
Cable Jacket: Santoprene
Cable/Probe Connection: Santoprene
Weight: 0.2 lbs (90.7 g) with 10.5 ft (3.2 m) cable
The black outer jacket of the cable is Santoprene ® rubber. This
compound was chosen for its resistance to temperature extremes,
moisture, and UV degradation. However, this jacket will support
combustion in air. It is rated as slow burning when tested
according to U.L. 94 H.B. and will pass FMVSS302. Local fire
codes may preclude its use inside buildings.
NOTE
2