Campbell Scientific 110PV Surface Temperature Probe - Manual (Page 13)

110PV Surface Temperature Probe
3. Installation and Wiring
3.1 Placement on a Photovoltaic (PV) Module
The 110PV should be centered on the back of the PV module (see Figure 3-1).
If the module has several distinctive photocells (see Figure 3-2), the 110PV
should also be centered on the back of a photocell.
FIGURE 3-1. 110PV mounted to a PV module
FIGURE 3-2. At left is a PV module with distinctive solar cells.
At right is a PV module that does not have distinctive solar cells.
7