ACR Electronics 2662 - Manual (Page 49)

4.6 Service and User Passwords
WARNING: It is very important that the Service password not be lost. Keeping the
password in a second location may be wise. Record your custom service and user passwords
in the table provided in the appendix of your User Manual. Memorizing the password is best.
If you lose this password, you cannot make any further configuration changes: Access to the
AIS is blocked. Another master key is not available and the unit would have to be returned to
the ACR Service centre. This service is not free of charge.
Once you have entered the system, please change the default password to your own
passwords, for both levels of access. Use different passwords for the different security levels.
Your passwords must meet the following criteria:
Minimum of six (6) characters, maximum of eight (8) characters
Letters must be in UPPER CASE
Acceptable characters are the A-Z alphabet and 0- 9 digits
Password may contain both letters and numbers
The User Password can be reset in the service configuration menu by entering the Service
Configuration menu and creating a new password.
Changing the Service Password
Select “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] or
press Number 6 on the keyboard.
The password query field appears. Input default Service Password and press M5 [Enter]. The
default password from the factory is mentioned on your AIS display at the protection foil.
Please see the appendix in your User Manual for additional password information.
Select Submenu 1 “Change Service Password” with cursor button [Up] & [Down] by pressing
Number 1 on the keyboard.
N 1 o 24' E 0 o 17' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
Y1-03-0212H 45