Samlex America ST1000-148 - Manual (Page 24)

23
3-5. Rear Panel Operation
Rear view
ST-1000/ST-1500
ST-2000/ST-2500
3-5-1. Fan Ventilation:
Be sure to keep it a distance (at least 1 inch) form surrounding things.
3-6. Installation
The power inverter should be installed in a location that meets the following
requirements:
3-6-1. Dry – Do not allow water to drip or splash on the inverter.
3-6-2. Cool – Ambient air temperature should be between 0℃ and 40℃,
the cooler the better.
3-6-3. Safety – Do not install batteries in compartment or other areas
where flammable fumes existence such as fuel storage areas or
engine compartments.
3-6-4. Ventilated – Allow at least one inch of clearance around the
Inverter for air flow. Ensure the ventilation shafts on the rear
and bottom of the unit are not obstructed.
文管中心
發行章
正式文件，妥善保存