LBL Lighting Standoff Ball Joint Assembly - Manual (Page 2)

2
BALL JOINT POST
Loosen the M4 set screw on the ball joint (Do Not Remove)
post with the 2 MM Allen wrench provided and remove the
support post.
2 MM ALLEN
WRENCH
M4 SET
SCREW
Screw the ball joint post completely to the threaded nipple.
BALL JOINT POST
THREADED NIPPLE
BALL JOINT POST
BALL JOINT ROD
2 MM ALLEN
WRENCH
M4 SET SCREW
Push the ball joint rod completely into the ball joint post and
tighten the M4 set screw with the 2 MM Allen wrench.
Repeat steps 8 through 10 for the remaining ball joint
connectors.
Loosen the M4 set screw on the support (Do Not Remove)
post with the 2 MM Allen wrench provided and remove the
support post.
STANDOFF ROD
Screw the support post completely onto the threaded post.
SUPPORT POST
THREADED POST
2 MM ALLEN
WRENCH
M4 SET SCREW
Push the standoff rod completely into the support post and
tighten the M4 set screw with the 2 MM Allen wrench.
Repeat steps 12 through 14 for the remaining standoffs.
SUPPORT POST
2 MM ALLEN WRENCH
M4 SET SCREW
SUPPORT POST
1A
8
9
10
11
1D
1A 1E
1A 1F
13
1A 1G
14
15
12
1A 1H
1A 1I
8
9
13
14
10
12