LBL Lighting LED Illum MO Surf Mag Xfmr 300w 277v/12v - Manual (Page 4)

4
SAFETY
WIRE
Hook the transformer safety wire onto the backplate bracket.
Connect the backplate green wire to the ground in accordance
with local electrical codes.
Connect the transformer white wire to the neutral power line
wire with a wire nut.
Connect the transformer black wire to the hot power line
wire with a wire nut.
Connect the LED-Illuminated
Monorail to the Transformer
BACKPLATE
BRACKET
Slide the vertical portion of the housing "L" slots completely
onto the three backplate #8-32 flat head screws.
Rotate the transformer housing clockwise to lock the housing
slots around the #8-32 flat head screws.
Tighten the three #8-32 flat head screws with the 3/32 Allen
wrench to secure the transformer in place.
#8-32 FLAT
HEAD SCREW
3/32 ALLEN
WRENCH
HOUSING
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company A Generation Brands Company
Connect the Monorail to the standoffs so that the Monorail is
secured in place. Refer to the instruction provided with the
standoff.
Make sure that the transformer power is off.
Place the power feed housing onto the Monorail.
Completely back out the screw on the power feed cap.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
Tighten the screw on the power feed cap for proper power
connection.
LED-ILLUMINATED
MONORAIL POWER FEED
HOUSING
POWER
FEED CAP
SCREW
1A 2C
1A 2D
1A 3A
1A 3B
3
4
5
6
1
2
3
4
5
6
5
8
6
7
9
10
11
9
10
11
5
6
7
8