LBL Lighting LED Illum MO Surf Mag Xfmr 600w 277v/12v - Manual (Page 3)

Loosen the three #8-32 flat head screws (Do Not Remove)
with the provided 3/32 Allen wrench.
Rotate the backplate counter clockwise so that the #8-32 flat
head screws are lined up with vertical cut out portion of the
"L" slots.
Remove the backplate from the housing.
#8-32 SCREW
BACKPLATE
3
Slide the power feed housing completely against the insulated
bushing. Make sure that the set screws are not inline with the
metal tube slot.
Tighten the two M3 set screws with the 1.5MM Allen wrench.
Repeat steps 2 through 22 for the other power feed.
Install the Transformer
Mount the backplate to the electrical box with the provided
two #8-32 screws.
CAUTION: Turn the power to electrical box off!
#8-32 FLAT
HEAD SCREW
BACKPLATE 3/32 ALLEN
WRENCH HOUSING
INNER WIRE
Feed the power feed cord through power feed housing and the
metal tube (included in the package) respectively. Slide the
power feed housing and the metal tube down the cord.
From end of the power feed cord, using a sharp cutter, cut a
slot for 3/4" on the outer wrapped wire.
Unwrap the cut portion of the outer wrapped wire and cut
around it evenly to remove it from the inner wire.
POWER FEED
HOUSING
METAL TUBE
3/4"
OUTER WRAPPED WIRE
INNER WIRE
CONTACT POST
INSULATED BUSHING
WIRE CAP
Strip exactly 1/4" of the inner wire. If the wire becomes frayed,
gently twist it between the thumb and forefinger.
Slide the insulated bushing on to the cord against the outer
wrapped wire.
Slide the new wire cap (included in the package) completely
onto the stripped portion of the inner wire.
Place the contact post completely onto the wire cap.
OUTER WRAPPED WIRE
INSULATED BUSHING
1.5MM ALLEN WRENCH
M3 SET
SCREW
Tighten the M3 set screw on the contact post with the 1.5MM
Allen wrench.
Slide the insulated bushing completely onto the contact post.
Pull the outer wrapped and metal bushing against the insulated
bushing.
METAL TUBE
CONTACT
POST
M3 SET SCREW
POWER FEED
HOUSING 1.5MM ALLEN WRENCH
METAL TUBE
1A 1F
1A 1G
11
14
12
15
16
1A 1H
18
19
20
13
17
21
22
1A 1I
11
13
21
22
15
12
14 16
17
20
18
19
1A 2A
1A 2B
1
4
1
4 4
2
3
2
3
23