LBL Lighting LED Illum MO Rail - Manual (Page 2)

2
Connect the LED-Illuminated
Monorail Sections
Push the Monorail sections completely onto the conductive or
isolating connectors.
Tighten the M3 set screws with the 1.5 MM Allen wrench.
Make sure that the set screw connection for conductive
connector is tight to avoid heat build up and corrosion. For the
isolating connector, tighten the M3 set screw firmly to avoid
stripping the thread.
CONDUCTIVE OR ISOLATING JOIN CONNECTORS
LED-ILLUMINATED
MONORAIL
1.5 MM ALLEN
WRENCH
M3 SET SCREW
Insert the Fiber Optic Cable into the
LED-Illuminated Monorail
Feed the fiber optic cable completely through the LED-
Illuminated Monorail.
LED-ILLUMINATED
MONORAIL
FIBER OPTIC CABLE
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company A Generation Brands Company
1
2
1
1A 2A 1A 3A
1
2
1